Forum

Network design of ground water sampling

Posted by DAA on February 5, 2013 at 2:31am in Ideas for Innovation

Hello, can  anybody thorow light on optimum requirement to decide the nos. of samples for ground water ananlysis.Is there any IS/guidlines, which suggests minimum distance between two sampling point of gorund water sampling/analysis, particularly when target area is coastal.I understand that it is depend on teh purpose of monitoring, but still how one can decide the nos. of samples and what will be grid of sampling points, i.e nos. of samples per sq.meter..is that?

Thanks in advance..

You need to be a member of Paryavaran.com- Indian Environment Network to add comments!

Join Paryavaran.com- Indian Environment Network

Email me when people reply –
Follow

Replies

  • DAA February 22, 2013 at 12:12am

    Thanks Amitji, thats true.BUt, in coastal area, where GW depth is 2 to 5 meter, it is difficult to judge the location for availability of GW. Can you please, advise of source of sample, means it should be collected from nearby wells or drilling at specific location for purpose?and , if drilling is there, then what shall be minimum distance between two bore drill?my purpose of monitoring is to check contamination to GW due to storage of dry bulk. HOw can i justify teh coverage of sampling & nos.of samples to concenred auditing authorities?

    Thanks in advance..

  • Amit Mishra February 21, 2013 at 12:43am

    As far as Coastal area is Concerned make your area into scale make a centre of area into your Map and Mark it into Square kilo meters encompassing  your aims and objective 

  • Amit Mishra February 21, 2013 at 12:40am

    1.First of all... do the Reconnassiance Survey of your study area,

    2.Evaluate the Ground water Depth, Try to find out the Gelogical formation kind of Rock formation in your study area whether,Metamorphic, Igneous or Sedimentary Rock and especially evaluate Fractures if any in the rocks which leads to ground water pollution.

    Kind of Slope,Drainage Pattern 

    3. Fluctuations in Ground water level,seasonal variations past reports 

    3A .The area which you have selected try to make it into 3 parts namely upstream middle stream and   Downstream depending on slope and drainage pattern. 

    4.Fix the parameters: 

    Physical,(pH,Temp,TDS,Turbidity,Conductivity)

    Chemical,(Alkalinity,Hardness,Chloride,Sulphate,Phosphate,Nitrate,Sodium and Potassium)

    Bacteriological,(Total and Feacal Coliforms)

    Nutrient and Demand parameter's (Total Kjeldhal's Nitrogen,DO,COD,BOD),Heavy Metals and Fluoride depending on your Aim and Objective of Sampling ...

    regards,

    Amit 

  • keerthi sureshbabu February 19, 2013 at 3:57am

    depending upon the depth of ground water u get, you can choose nearby scattered sampling and more nos like with in 1km 5-6 water samples. or ggo for area wise sampling

  • Jitender Saini February 8, 2013 at 12:40am

    you can do scattered sampling

This reply was deleted.