Dear All, I want to know that how to carry out adequacy assessment for effluent treatment plant. Is there any specific methodology by CPCB or any governing bogy.Plz suggest methodology to carry to this study.
You need to be a member of Paryavaran.com- Indian Environment Network to add comments!
Replies
can i have some example ,,,or any technical detail on this . my mail id is sumitvpatel@gmail.com
Gunjan Gupta said:
you can calculate the volume of various treatment units along with the detention time offered to each unit, the sum of hydraulic loading/sum of detention times offered should be within the total hydraulic loading rate (flow rate)
thnks u so much sir,,,,,,,,sir i have this document but they have not mention about adeqaucy .so if u have methodology for adequacy plz let me know.
U may refer the following URL for guidance
http://www.doe.gov.bd/publication_images/15_etp_assessment_guide.pdf
Take the help of sample reports
May be at
https://www.flickr.com/photos/christmaschurch/4888725608/in/photost...
dear sir i am going to assess adequacy of existing ETP. Performance assessment i can do based on removal of parameter from each unit. but i want to carry out adequacy first.
Dr. PAWAN KR. SINGH said:
Dear sumit
before suggesting any solution , i would like to to know, are going to assess an existing ETP?. whate is meant for adequacy , is it performance assessment in term of reduction COD BOD.
if your objective is performance assessment,,,,, collect sample after each components and analyze it for your desired components. the obtained results will help you to assess the performance of the ETP system and will tell you, what measure are needed
shall i required to measure flow?
Dear Mr. Patel
You can take the dimensions and capacities of each of the treatment units of the ETP and assess them with the effluent in question.
you may have to look into the removal of pollutants both by design and by coincidence for each of the treatment unit of the ETP and systematically assess the capacities of individual units.
Reddy